ĉiuj Kategorioj

Hejmo> Produktado Linio > Zirkoniaj Blokoj

Blanka Zirkonio

Blanka Zirkonio

La blanka zirkonio estas senmetala materialo por la estetika restarigo, kiu estas atestita biokongrua, ekstreme daŭrema materialo uzata en dentokuracado hodiaŭ.

kontaktu nin
Indikoj:

Restorations are available with monolithic full contour crowns, bridges, veneers or full arch.


Blanka Zirkonio

  • Trajtoj
  • Akcesoraĵoj
  • Tech Specs
  • Informo pri Demando
Features of White Zirconia

The preshaded zirconia that covers all 16 shades of the VITA Classic shade guide,  With pre-shaded zirconia there is no need for laboratory technicians to shade each unit, saving production time.


  • 1
    Consistent VITA® Classic Shade Match

    Strictly follow up VITA® Classic Shade from the R & D phase and also by the standard production with shade match.

  • 1
    Glazed with Bloomden CeramStar Glaze/Stain Kit

    Preparation: Multilayer crown bridge after milled and sintered and then glazed.

  • 1
    Incisal Translucency and appearance

    The translucency of preshaded zirconia and the additional light refraction from the preshaded zirconia phase results in a natural incisal translucency.


Accessories for White Zirconia
  • CeramikoStar® Glaze/Stain Gingivalo fiksita

    It contains 4 single masses as well as special liquids and accessories. The 3D pastes were specially developed for the aesthetic finalization and characterization of the gingival-colored parts of ceramic restorations, made of lithium disilicate and 3D Pro Multilayer. All parts of the set are also available individually.

    LERNU PLI
  • accessories分辨率
    CeramikoStar® Glaze/Stain Vivid Set

    It contains 7 single masses as well as special liquids and accessories. The 2D pastes were specially developed for the basic aesthetic finalization of the ceramic restorations, made of lithium disilicate and 3D Pro Multilayer. All parts of the set are also available individually.

    LERNU PLI
  • accessories分辨率
    CeramikoStar® Glaze/Stain Blossom Set

    It contains 17 single masses as well as special liquids and accessories. The 2D and 3D pastes and stains were specially developed for the professional aesthetic finalization of ceramic restorations, made of lithium disilicate and 3D Pro Multilayer. All parts of the set are also available individually.

    LERNU PLI
White Zirconia Technical Specifications
Teknikaj Specifoj

UT ST-Plus
ST estas
ZrO2+ HfO2+Y2O3 ≥99% ≥99% ≥99% ≥99%
Y2O3 9% -10% 7.0% -7.8% 4.5% -6.0% 7.0% -7.8%
Al2O3 < 0.05% < 0.15% < 0.15% < 0.15%
Density before sintering (g.cm-3) 3.20 ± 0.05 3.15 ± 0.05 3.15 ± 0.05 3.15 ± 0.05
Density after sintering (g.cm-3) 6.06 ± 0.01 6.08 ± 0.01 6.09 ± 0.01 6.08 ± 0.01
CTE (25-500°C) (K-1) 10.5 ± 0.5 10.5 ± 0.5 10.5 ± 0.5 10.5 ± 0.5
Flexural strength after sintering (MPa) > 600 > 1000 > 1200 > 1100
Aging surface monoclinic phase content < 15% < 15% < 15% < 15%
Lumo-transmisiado < 49% < 46% < 43% < 47%
Chemical solubility after sintering (µg.cm-2) <100 <100 <100 <100
Citotokseco 0-nivelo 0-nivelo 0-nivelo 0-nivelo
Radioactivity (Bq.g-1) <0.1 <0.1 <0.1 <0.1
Sintering temperature (°C) 1470-1530 1480-1530 1500-1530 1500-1530
sistemoj 98mm / 95mm / 92*75mm
dikeco 12m / 14mm / 16mm / 18mm / 20mm / 22mm / 25mm
Ombroj A1 A2 A3 A3.5 A4 / B1 B2 B3 B4 / C1 C2 C3 C4 / D2 D3 D4

 



Informo pri Demando